It is easy to save water, and knowing how to do it is easier as there are numerous resources on the
internet. If you want to start saving water, either because you want to cut on your water bill or for the
sake of the environment, you should start by conserving water that gets wasted in your bathroom.
The only problem is remaining committed to conserving water in your bathroom. Remember, simple
choices like this can have a long-lasting impact on natural water supply. Utah and Salt Lake City
areas has already witnessed historical droughts, and global citizens are doing all they can to
promote water conservation.
It is wise to use these lessons and start applying them to your bathroom routine. The following tips
will help you conserve water while taking a bath in your shower. They will also help you low your
water bill considerably.
Use Less Water
While showering, let the water fill the tub halfway to prevent water from spilling over. Moreover, do
not wait until the water becomes hot to plug the drain. You should start by connecting the pipe before
you adjust the temperature while the tub is filling.
You can save gallons of water over time. If the water takes longer to heat up and you are in a rush,
collect the cold water by catching it using a bucket and use it later for household purposes.
Limit Shower Time
Reduce the time you take in the shower. Statistics say showering takes about 17 percent of water
usage at homes, which translates to approximately 40 gallons of water per day. Consider installing a
shower time to start saving water immediately. There are two primary types of shower times Salt
Lake City:
Sand timers
• They feature an hourglass shape. The sand in the glass begins to fall while counting. You will
be able to see when your time is up in the shower. The timer records 5 minutes intervals.
Digital Timers
• This type of timer can tell you the time you have spent in the shower and the amount of water
you have used during this time.
Turn Off the Shower
If you are doing other things such as applying hair conditioner, shaving your hair or comb it, turn off
the shower. This can help to reduce water use by half. Also, do not do a lot of things in the shower.
Install a Low-Flow Shower-head
You may have to spend some money. However, your efforts in Utah water conservation will save you
a lot of money in the long run. A typical shower-head is capable of allowing more than 5 gallons of
water per minute, which is a lot. On the other hand, a low-flow shower-head allows 2.5 gallons of
water to flow per minute, or even less.
We want to say thank you to all of our sponsors who help us share our very important message.
Today we want to give a special shout out to our favorite home construction company in Utah, CK Builders. We are very grateful for their support as we all try to save water together.
Maps Driving Directions:
No comments:
Post a Comment